Aegis Solo 3 Discovery Pack

A battery charger included in the pack:

 

Even if the Aegis Solo2 S100 kit has a USB-C port (cable included), we recommend using an external charger for your battery as much as possible.

That’s why Arômes et Liquides completes this nice pack with the MC1 charger by Xtar allowing you to fill your battery with energy!

The MC1 charger by Xtar in the Aegis Solo 3 Discovery Pack

 

The Z Sub Ohm clearomizer:

Geek Vape equips its Aegis Solo 2 S100 kit with the Z Sub Ohm clearomizer.

With a 24mm diameter, it has a bulb Pyrex with a 5.5ml e-liquid capacity and an 810 drip tip for airy vape sessions!

 

 

The Z Sub Ohm clearomizer of Geekvape’s Aegis Solo 3 kit

 

The Z Series coils:

Your Aegis Solo 2 S100 kit is delivered with two Z Series coils meant for an airy draw in direct inhaling (DL).

Compatible with all the collection of Z Series coils, you’ll use the two included with the following values:

• 0.25Ω Z coil: to use between 45 and 57 watts
• 0.20Ω Z coil (pre-installed): to use between 70 and 80W

After two to three weeks of use, your coil starts to show some signs of wear (loss of flavors, light burnt taste), it is time to replace it with a new one.

For this:

1. Take the clearomizer of the mod
2. Unscrew the bottom part
3. Pull on the used coil (don’t hesitate to use the key included)
4. Soak a new coil of some e-liquid drops
5. Insert it in the same place as the old one
6. Screw the clearomizer base
7. Fill it with e-liquid
8. Wait for 5 to 10 minutes before vaping it so the new coil is correctly primed with e-liquid

 

The top airflow of Z Sub Ohm:

Located on the top of the clearomizer, the setting of air intakes thanks to a wheel that you’ll turn to your liking: to free more or less the airflow hole.

You’ll easily alternate between an airy inhaling and a slightly more draw according to the vape type used.

With the Z Sub Ohm, Geek Vape bets on a leakproof system thanks to its position at the top of the clearomizer.

 

The top airflow of Z Sub Ohm clearomizer of Geekvape’s Aegis Solo 3 kit

 

How to fill your e-liquid tank?

Thanks to its 5.5ml bulb pyrex, the Z Sub Ohm of Aegis Solo 2 S100 kit offers a great e-liquid capacity.

But that’s not all! Geek Vape also equips it with a top fillingsystem (by the top) allowing you to quickly and easily access the filling hole. Once you’ve unscrewed the top cap, you only have to insert the tip of your bottle in one of the two large slits and proceed to the filling in the e-liquid of your tank.

When the time comes to fill the 5.5ml tank, get your e-liquid bottle with a dropper tip, then:

1. Unscrew the top cap of the clearomizer
2. Insert the bottle tip in one of the two filling holes
3. Pour your e-liquid, never pour anything into the central chimney hole
4. Carefully close the top cap
5. Wait for 5 to 10 minutes before vaping if you use a new coil

 

The filling of Z Sub Ohm clearomizer of Geek Vape’s Aegis Solo 3 kit

 

Box contents:

• 1 100W Aegis 3 mod
• 1 Z Sub Ohm clearomizer
• 1 0.2ohm Z Series coil
• 1 0.4ohm Z Series coil
• 1 USB-C cable
• 1 spare pyrex
• 1 set of spare pieces
• 1 user guide

 

The Aegis Solo 3 kit is made by Geekvape. It is sold without batteries.

 

Box contents of Geekvape’s Aegis Solo 3 kit

 

The MC1 charger by Xtar:

 

Included in the Aegis Solo 3 beginner pack, the MC1 Xtar will be your ally to refill it with battery!

Handy and compact, you’ll slide it into your Sony VTC6 18650 battery (included) by respecting the direction of insertion of the positive and negative poles.

Its compact dimensions of 92 x 22 x 25mm make it discrete and easy to transport.

You’ll connect the micro-USB cable (included) that you’ll link to the external energy source (USB).

 

Characteristics of MC1 Xtar charger:

• Single battery charger
• LED indicator
• Functioning temperature: 0 – 40°C
• Intensity of recharging current: 1A
• Types of batteries: Li-On / IMR
• Compatible with: 14500, 14650, 17500, 17670, 18350, 18500, 18650, 20700, 21700, 26650

 

2 Sony VTC6 20A 3,000mAh 18650 batteries included in the pack:

 

Ready-made, the Aegis Solo 3 pack holds all the necessary material to vape. To complement the Aegis Solo 3 kit from Geek Vape, you’ll find not only the MC1 battery charger from Star, but also not one, but two 18650 VTC6 3000mAh 20A batteries by Sony.

Compatible with your kit, this battery offers a capacity of 3,000mAh. This set of two will enable you to make the most of your electronic cigarette without interruption: use one of the two batteries while the other refuels on its MC1 charger!

 

Characteristics of the Sony VTC6 20A 3,000mAh battery:

 

• Weight: 48g
• Dimensions: 18x65mm
• Chemistry: INR Lithium-Ion
• Capacity: 3,000mAh
• Maximum continuous discharge rate: 20A
• Maximum pulse discharge rate: 30A
• Minimal tension: 2V
• Maximal tension: 4.25V

Be sure to observe all safety rules, both when using the battery and when transporting or storing it:

• Keep away from heat sources
• Do not use if worn or damaged (use a wrap to repair)
• Make sure the battery is inserted into the mod or external charger with the positive and negative poles aligned
• Always use an external charger rather than charging via your kit’s USB port
• Always use a protective case when transporting or storing your battery pack

The Sony VT6 3,000mAh 20A batteries of Aegis Solo 3 discovery pack

 

Pack contents:

• 1 Aegis Solo 3 mod
• 1 Z Sub Ohm clearomizer
• 1 5.5ml spare tank
• 1 0.2ohm Z Series coil (pre-installed)
• 1 0.25ohm A Series coil
• 1 key for coils
• 1 set for spare pieces
• 1 USB-C cable
• 1 user guide
• 2 Sony VTC6 3,000mAh 20A batteries
• 1 MC1 Xtar charger

The Aegis Solo 3 Discovery pack is offered by Arômes et Liquides (A&L).

Contents of Aegis Solo 3 Discovery Pack by Arômes et Liquides